|
Ailerons, Page 1 |
||
 |
 |
 |
Making the aileron hinge pads and flange. |
Trimmed. |
|
 |
 |
 |
|
Extra BID as hinge points. |
Aileron cores trued up, added a little foam, joggled and glassed bottom. | Cut off the extra foam I added, as it was unnecessary, but it did make a nice surface to use a circular saw to make a straight cut. |
 |
 |
 |
| Hinge area glassed from the bottom. | Both aileron cut apart and trimmed to fit. | Hinges installed on the right. |
 |
 |
 |
| Hinges on the left. | Core box created. | |
 |
||